brother printer setup mac wifi

How to connect brother printer to wifi mac

Brother was established as a business more than a century ago. However, the Brother Industries that we are familiar with today was founded in 1962. Brother is a well-known printer brand that is now recognizable worldwide and has been for many years.

The Japanese corporation provides a wide range of products, including color printers for homes, workplaces, schools, and companies. In the twenty-first century, printing has advanced significantly, as has most other technologies. Today, wireless printing is available, enabling consumers to print from any location in their home or place of business. In this blog, you will learn about brother printer setup mac wifi. We will demonstrate everything in easy to follow steps, so follow along!

Things Needed

  • Check to determine whether the access point you’re using has a physical WPS button. If not, invest in a router or extension that has one.
  • Make sure the network you’re using has WPA or WPA2 security encryption enabled. On the network configuration screen, verify the same.

As soon as you meet these two prerequisites, you may begin the setup process.

There are two ways for brother printer set up mac wifi. We are about to see them.

Setting up a Brother printer on WiFi using WPS

  • Keep your brother printer next to the network router so they are within range. When you’re prepared, you may do the following steps:
  • The WPS button on your wireless router has to be depressed. Now, the front-panel WPS LED will start to flicker and light up. This indicates that the WPS has been turned on and that the router is presently looking for client devices to connect to.
  • Squeeze the Brother printer’s WPS button. Press and hold the same button once you see the WPS LED come on and blink. Eventually, the WPS LED will become solid.
  • Remember, you have two minutes from the time you press the WPS button on your network to press the WPS button on your printer. If not, you must retrace your steps and begin again.
  • Once the printer and router have connected, the network LED will turn on and the LED will become solid.

Verifying a network connection

When you are connected, just carry out these simple actions to confirm the network pairing:

  • Start your Brother printer, then insert an A4-sized document.
  • Press and hold the WiFi button as soon as the WiFi LED begins to blink.
  • Press the WiFi and Color buttons repeatedly, one after the other.

Your brother’s printer will print the network settings on the page if you do this. If the network connection is working correctly, you will get a notification that says “Connection: Active” with the router’s SSID displayed underneath it. You may try again with the network settings if it prints differently.

Setting up a Brother printer’s WiFi with a mobile app

If your wireless network doesn’t support the WPS capability, you may always connect your printer to the wireless router manually. You could do any of the following:

  • Using the up/down arrows on the printer control panel, choose Network from the list of options. When you see the Network option, click “Ok.”
  • A new window will appear. Choose WiFi Direct after browsing the options using the up and down arrows. When you see “Ok,” click it.
  • After that, choose Group Owner from the list and press OK once again.
  • After switching the selection to the ON position, press OK once again.
  • Click OK after selecting Manual in the window’s settings.
  • Switch WiFi Direct On? will now display as a message. After clicking Accept, press Ok.

You may find the SSID and the default password on the Brother printer’s screen. might write them down for further reference.

Use of a smartphone
  • Right now, start the printer setup process on your smartphone.
  • On your smartphone, go to Settings and choose the Connections option.
  • After clicking WiFi, turn it on.
  • Your screen will now display the available wifi networks. Select the one that is appropriate for your router, then click the Connect button.

You can easily print papers now that your smartphone and Brother Printer are linked. This is thus brother printer setup mac wifi. But when a brother printer won’t connect to Mac WiFi, there can sometimes be an issue. We’ll now demonstrate how to solve it.

WiFi connectivity issues with a Brother printer

After learning brother printer setup mac wifi, it’s time to figure out why it won’t connect. To accomplish this, do these actions:

  • Turn on your Brother printer.
  • To reactivate the wifi connection, press the Menu button.
  • Select OK.
  • Select Reset Network.
  • Select Yes by pressing key 1.
  • Press 1 again to confirm the restart.

The printer will now restart, indicating that the network reset was successful.

Continue to the following step to connect your Brother printer to Wi-Fi.

  • To display the Wi-Fi setup message once the network has been reset, you must restart the Brother printer. After consulting the Quick Setup Guide, click OK.
  • Press Ok three times to launch the Setup Wizard.
  • A message will appear on your screen. turn on WLAN? Click “Ok” to accept. Once again, click “Ok.”
  • Wait for it to find a wireless network.
  • The list of SSIDs will appear on the screen. Select the Wi-Fi network you want to use and input your router’s WEP key or WiFi password to connect a Brother printer to it.
  • Type the Wi-Fi password into the Brother printer’s keypad.
  • After selecting “Ok,” press 1 to make the modifications.

Here’s how to solve the brother printer won’t connect to mac wifi. Now, we successfully know brother printer setup mac wifi and how to resolve the problem when it won’t connect to mac wifi. For more information on the same, feel free to get in touch with our team.